Park Tool Ratcheting Torque Wrench (3/8" Drive | 10-60 Nm)

With the increasing number of lightweight components and torque specifications found on motorcycles and bicycles, a good torque wrench is a necessity for every mechanic. The TW-6.2 is a high quality ratcheting click-type torque wrench that accurately measures and applies the proper amount of torque to threaded fasteners. The TW-6.2 is designed for higher torque settings that can be found on components such as bottom brackets, cassette lockrings, and crank bolts. Features a 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet. Comes in its own protective case.

• Torque range: 10 to 60 Newton meters (88 to 530 inch-pounds)
• Adjustable in 0.25 Nm increments
• Ratcheting 3/8" drive
• Reads and registers torque values for both left hand and right hand threading
• Calibrated to be accurate to +/- 4%
• Length: 362 mm (14.25")

NOTE: Torque wrenches are measuring instruments and are not intended for use as a general-purpose ratcheting driver. Do not exceed 60 Nm when using the TW-6.2.